Right, that's everything you need to take care of before letting students hand over their money to enrol in your courses. All you need to worry about from this point is what to do while you're delivering training, but before you hit the 'Export' button on the AVETMISS runner to collate all your reporting data.
You are required to validate each student's USI against their first name, last name and date of birth with the USI Registry System. If you have an onCourse support plan and have correctly set up your USI Integration in onCourse, onCourse will do this automatically for each USI supplied. For more information on creating and validating USIs, please refer to the USI Chapter.
Students who are exempt the USI requirement will need the report the value 'INTOFF' or 'INDIV' in the USI field to demonstrate that they are exempt and their exemption type. onCourse will assist you with complying with the requirements by automatically exporting 'INTOFF' for students with residential address in a country other than Australia.
This information can be entered on the General tab on the student Enrolment.
This information can be entered on the General tab on the student Enrolment.
This is set in the student's Enrolment record on the General Tab.
This can be set in the class on the VET tab or in the student's enrolment General tab.
This field is labelled 'specific program identifier' and can be found on the outcome record.
This information can be entered on the General tab on the student Enrolment.
You can enter this information in the Class VET tab, the general tab in Enrolment or in the individual outcome record on the Class Outcomes Tab or the Enrolment Outcomes tab. Double click the outcome to see this field.
This is the fee you charged the student at the time of enrolment, divided by the total nominal hours in the course, multiplied by the nominal hours of each unit to set a proportional student fee for each unit. To charge a fee, set a class fee in the Class General tab. VET courses are usually GST exempt. During the enrolment process, you can charge the student the full fee or give them a manual discount if they meet fee exemption criteria. The fee they pay here is what is reported. If you don't usually use onCourse for invoicing and payment records, create a full cash payment for each student on enrolment. Don't worry about the invoices that are automatically created here - they have nothing to do with AVETMISS.
Exported from the option set the Enrolment record value from the field of the same name.
Exported from the option set the Enrolment record value from the field of the same name.
You must ensure that tutors are marking student attendance for every class. This can either be done in onCourse itself, within the attendance tab of the applicable class window, or more likely via the SkillsonCourse Portal. Accurately marking attendance means that certain fields will update automatically once a course has completed.
You can learn more about marking attendance in onCourse by visiting the Attendance section of our Classes chapter, here.
Tutors should always be marking student outcomes in the SkillsonCourse portal periodically to ensure data is as up to date as possible.
You can learn more about marking outcomes in the SkillsonCourse Portalby clicking here.
You can set the outcome identifier (we call it status) on the Outcomes tab in the Class window. If you select all the records in the list and right click on them, you can set them all to 'Successful (20)' and then go back and change the others that should be other statuses (like RPL or Not Yet Competent) one by one. Or you can set them all one by one, whichever you prefer. You can also set the outcome status in the student contact record or the enrolment record.
If you set an outcome an RPL, RCC or Credit Transfer status, the Delivery Mode Identifier will always export as 90 - NA regardless of what is set in the outcome value.
onCourse will create AQF compliant certificates for your students, but for the purposes of lodging AVETMISS, you don't need to print or issue them. Qualification and skill set completions are reported in the NAT00130 file for all states. If the export flavour is for a funding type that requires it, details of anticipated qualifications e.g. NSW Smart and Skilled or Victoria's Skills First.
The 'awarded on' date determines the date of certificate issue for AVETMISS reporting purposes. By default, this date will be the date the certificate was created in onCourse. If you create certificates early in a calendar year that need to be reported as part of the previous calendar years completions, be sure to back date the 'awarded on' date to the previous year.
More information about creating certificates in onCourse can be found here.
How to set and customise outcomes to meet your reporting needs
When you set up a VET course and class and enrol students, outcomes will automatically be created for each of the units of competency you assigned to the course, with the properties start and end date, reportable hours, delivery mode and funding type you set in the class.
There are multiple places you can access the outcomes and set them, plus modify the details mentioned above for individual students - in the class outcome tab, in the student enrolments tab, in the enrolment outcomes tab, the find related outcomes window and in the certificate window when you are creating a new certificate.
A students outcome is the record of their engagement with a Unit of Competency or Module from a training package or accredited course. Outcomes are often reported to government through processes such as AVETMISS and must meet certain validation rules. Primarily, an outcome records if a student has passed or failed their course. The outcomes available for selection are as follows:
|Competency achieved/pass (20)|
|Competency not achieved/fail (30)|
|Recognition of prior learning granted (51)|
|Recognition of prior learning not granted (52)|
|Recognition of current competency granted (53)|
|Recognition of current competency not granted (54)|
|Credit transfer (60)|
|Did not start (NSW: 66, SA: @@)|
|Continuing enrolment (70) *|
|Non-assessed enrolment - Satisfactorily completed (81) **|
|Non-assessed enrolment - Withdrawn or not satisfactorily completed (82)|
|Result not available (90) ***|
Refer to the NCVER publications, VET Provider Collection Specifications and AVETMISS Data Element Definitions for more information regarding the definitions and use of these outcomes.
* You do not need to set the outcome 'Continuing enrolment (70)' for any outcomes. During the AVETMISS export process, if the outcome end date is in the calendar year after the date range of the export, 70 will automatically be exported.
** If you export data for non-VET outcomes, you do not need to set the outcome 'Non-assessed enrolment - Satisfactorily completed (81)'. This will always be exported for unset non-VET outcomes.
*** You may not need to set 'Result not available (90)'. During the export process, you can choose to set this outcome for all unset VET outcomes
Outcome data is available in the enrolment record, the student record, the class record and via the 'Find related' outcomes option.
From the file menu, select Activity > Outcomes to see all outcomes in the database. The outcomes list view allows you to search and sort on all outcomes, or use the core filter to view outcomes in progress, pre-commencement or completed.
To see outcomes related to a particular record, such as an enrolment record, double click on the enrolment and navigate to the outcomes tab. You can do the same thing in a class to see all outcome records for the students enrolled in that class.
When you look at the education tab of a student's contact record, you can see all their outcomes. These outcomes could have been created via enrolments in onCourse or through prior learning record imports.
Example 30.1. Using find related outcomes
Start from the classes window and locate the class, or group of classes you wish to find the outcomes for.
Highlight the classes, and from the 'Find related' icon in the list view, select 'outcomes'.
A new window will open showing the outcomes list. From this list you can run further searches or use the filters to search the outcome list for outcomes in progress, pre-commencement or completed.
This same process can be done from the contact, student or the enrolments list view. Outcomes linked to prior learning records (which are available from the contact or student record) will not show any data in the course or code column, as they were not created via an enrolment in onCourse.
To set the outcome, modify the start or end date, or delivery mode, simply open the record you wish to change and enter the data. You can also modify the unit/module the outcome is linked to, change the funding source or change the reportable hours.
If you wish to add additional outcomes to a students enrolment, open the enrolment record to the outcome tab, and click the plus sign to add an outcome. You may need to do this if a student completes an additional unit by RPL, or if the entire class complete an additional unit to what was originally planned in the course.
When setting a given Class as Self Paced, the start date and end date for the student outcomes are set as follows:
Start Date is the date the student enrols in the Class
End Date is the start date plus the maximum days to complete that has been set for the Class via the General tab.
All RTOs are obliged to report their training activity data under the AVETMISS standard, as part of their registration obligations. For more information on Total VET Activity Reporting, please refer to the AVETMISS chapter of the user handbook.
There may be other occasion when you need to export your outcome data for your own recording keeping purposes. To that end, onCourse contains some CSV exports you can open in excel that are a little like more user friendly, readable versions of AVETMISS data.
The 'Class Outcomes CSV' or 'Extended Outcomes CSV' exports in the class window show outcome data, funding sources, and useful information for audit evidence trails like the name of the tutor contact who marked the outcome via the portal.
Another class export called 'Class Attendance CSV' exports an electronic record of the marked class roll, with any comments made for partial attendance or approved absences and the details of the tutor who marked the roll.
If you are migrating to onCourse from another AVETMISS compliant student management system, or have students who have completed training at another RTO, you can add prior learning data to a student's record that can be used to create Certificate records in onCourse and also be exported out as AVETMISS data.
The education tab of a student record is comprised of four sections - enrolments, prior learning, outcomes and certificates. In onCourse, both enrolments and prior learning can be vocational, and linked to one or more units of competency or be non-vet and linked to no formal study units.
To add prior learning to a student record, click on the + option to the right of the prior learning panel.
Prior learning must have a title - this can be descriptive of the course or training conducted elsewhere. Optionally, the prior learning record can be linked to a Qualification or Skills Set on the general tab, contain reference to an external system reference number e.g. the course code or enrolment code from the previous system and optional descriptive notes.
On the second tab, outcomes, you can manually add one or more units of competency or accredited modules to the prior learning record. It is important you add start and end dates to the units of competency, and a valid outcome status here if you want to report them for AVETMISS or use the unit to create a certificate. If you are adding units completed at another RTO, you should record the outcome status as 'Credit Transfer'.
If you scan any documents, such as a copy of their Certificate, you can add them to the prior learning record also. You will just need to make sure you save the prior learning record first, before adding documents.
Once the prior learning record has been saved, the outcomes attached to the prior learning will appear in the outcomes section of the student's education record, combined with any outcomes completed by the student via enrolments into onCourse classes.
If you are migrating to onCourse and wish to bring over your student and outcome data, onCourse can import standard AVETMISS files to create student contact records with prior learning data.
There are four built in types of AVETMISS data imports, with different purposes depending if you are importing new data to onCourse, or updating existing onCourse records. If you are importing data into an active onCourse database, please speak with us first to confirm what import option is the best option to avoid creating duplicate student records.
onCourse AVETMISS outcome import - This option is best for colleges starting a new onCourse database who want to import AVETMISS files from another system, and do not have student records in the onCourse database yet. You will need NAT00060, NAT00080, NAT00085 and NAT00120 files for this import. This import will create student records in onCourse, and attach prior learning records to those students.
If you run this import twice, you will create duplicate student data. This import does not try and check for matches.
onCourse AVETMISS student import - This is an alternative import option for colleges new to onCourse to import student contact data only, via the AVETMISS NAT00080 and NAT00085 data. This will create contact records without any learning history.
onCourse AVETMISS outcome update import - This import option is for colleges who already have student contact records in onCourse and wish to update those records with data from an external source e.g. ARMS data for AMEP students. This import will try to match a student to their existing onCourse record based on a firstName, lastName and DoB match, and will create a new student record if it can't find a match. Note that any student matches found will have their contact data overridden by the data from this import.
This import also tries to match importing outcome data to data already recorded in onCourse, and avoid creating duplicate prior learning records if the record doesn't already exist. This import will add additional outcome data to existing prior learning records when it finds multiple outcomes belonging to the same qualification code.
You will need NAT00060, NAT00080, NAT00085 and NAT00120 files for this import.
onCourse AVTETMISS student update import - This import updates student contact details in onCourse based on NAT00080 and NAT00085 data files imported from another system. This import will try to match a student to their existing onCourse record based on a firstName, lastName and DoB match, and will create a new student record if it can't find a match.
Note that you could potentially update onCourse student records with outdated data using this import option, so use with caution when importing data from a record set older than your onCourse records.
You will need validated NAT00060, NAT00080, NAT00085 and NAT00120 files first. Make sure these files have been validated in the NCVER AVS tool and are reporting no errors before importing them into onCourse.
To import these files, type Import into the Find Anything search on the Dashboard, then select the result 'Import...' and select the onCourse AVETMISS option required. The import process will prompt you to open each of the NAT files listed above from a location on your computer.
Once you have selected all the required files, click on the import button on the bottom of the window.
When a VET course is created, qualifications, accredited courses, skillsets, modules and units of competency are set at the course level. More information about setting up VET courses is available in the Courses chapter of our documentation. Classes for the course inherit the units set at the course level. You can see these units by clicking the button under Outcomes in the class record.
When a student enrols in the class, the units of competency attached to the course become the outcomes attached to the student's enrolment. The start and end date of class become the start and end date of the outcomes, unless you choose to define different dates in the training plan. The settings in the class VET section become the default settings for each outcome for that class, but can be changed on an outcome by outcome basis. Within the class level outcomes can be changed or set, but can not be deleted and new outcomes can not be added here.
You can see the outcomes that have been assigned to each student in the class in the outcomes section, in the student's record in the enrolment section, and in the enrolment record in the outcomes section.
Via the student's enrolment record, outcomes added in error can be deleted from the enrolment record and additional outcomes can be added. Adding or deleting outcomes needs to be done per enrolment where training and assessment is taking place at your RTO. For outcomes gained in learning outside of onCourse, prior learning records can be imported, or manually added to the student's education section.
Once outcomes are linked to certificates and the certificate is printed and issued, the outcomes become locked in the system and greyed out so they can't be edited. If the certificate is later revoked, the outcomes can be edited again.
Sometimes when you cancel a VET enrolment, it is because it was created in error and you want to delete all the outcomes. At other times, often when the training is funded, you want the enrolment cancelled to make another position available in the class, but have the outcomes retained for reporting purposes.
When you cancel an enrolment, by default the checkbox option retains any outcomes that have had a status set, and deletes any outcomes with a status of 'not set'.
If, at this point, no outcomes have had their status set (for example, the student was enrolled into the wrong class) then all outcomes will be deleted. However, if this was a funded enrolment and you wanted to retain all the outcomes to later mark as 'withdrawn' then you can uncheck this option.
If you are cancelling an enrolment where you have already set all the outcomes, e.g. all set to withdrawn already, leaving this option checked will delete nothing.
If you have set outcomes on an enrolment record and want them deleted, and not retained, then you will need to either set them back to 'not set' before cancelling the enrolment, or you can manually delete them from the enrolment record after processing the cancellation.
If you have created a certificate that includes outcomes from the enrolment, they will always be retained on the student's outcome and can not be deleted manually, even if the certificate has been revoked.
Making government reporting less of a hassle for student focused literacy programs
Some colleges who deliver CSWE courses run open English language programs at different levels, aligned to the levels available in the CSWE program. Students enrol in course that is of an appropriate level and when a class group is formed, the tutor then assess the students and selects appropriate units from the CSWE curriculum for them to work towards. Some students in a class group may be working towards a single unit, while others may be working towards multiple units. Some students may be fee paying, some may be funded under various government programs. Some students may enrol in a class two or three times before attempting assessment against a CSWE unit and some students may not wish to be assessed at all. All of these circumstances combined can make headaches for the English classes coordinator who both wants to make sure the students and tutors needs are met, as well as reporting accurate statistics for funding purposes. Don't worry - onCourse has you covered!
onCourse includes all the available TGA data relating to accredited courses and classes. Unfortunately, TGA isn't able to provide details of accredited course modules, but for both the current and recently expired CSWE, we have built in all the modules to onCourse so you can select those you deliver.
If you college chooses different modules for each class, when you create a CSWE course, simply add the accredited course code to the VET page but leave the module list empty. If you always use the same modules, you can set up your CSWE course like any other VET course, with accredited course detail and modules.
If you do not set any modules in the course, student enrolling in CSWE linked classes will be given a VET-flagged but non accredited outcome, named whatever your course is named. You will override these outcomes later when you have the correct module information for each student.
You can enrol students in CSWE classes like you would in any other program. It doesn't matter if you mix AMEP, BACE and fee paying students together - the outcomes you set later on will separate them for AVETMISS purposes.
We realise many students attending CSWE classes may have enrolled in English classes at your college previously. Knowing the student language background, what classes they have attended, and what units they have completed will assist your tutors in selecting the best units for their current enrolment.
Once your students are enrolled and classes are ready to start you can print the Student Details Report from the class window, which will provide the tutors with the information listed above.
Once your tutor has reported back to the college each of the outcomes attempted and/or achieved by each student in the class, you can enter the data into onCourse, ready for your AVETMISS exports.
Go to the enrolment window and search for all the students in the class group you wish to work with by conducting and advanced search on the course code and class code.
The outcome tab of each student's enrolment will show a non-VET outcome. Open it and change it to the first CSWE outcome you wish to record. You can also set the funding source information in this window.
You can also add additional outcomes to the enrolment if a student has attempted more than one module during this class by clicking the plus sign.
If a student chooses not to be assessed against any outcomes, you either leave them with the VET flagged non-accredited outcome or choose a VET outcome and set it to 30 - Competency not achieved/fail or if you have documented evidence that they have refused assessment, yet successfully attended the class, you can set a suitable module outcome to 81 - Non-assessed enrolment - Satisfactorily completed
How and where onCourse records and calculates student contact hours
On the class window, there is a tab called VET, which contains fields that are useful for RTOs and relate to AVETMISS and other delivery statistics. There are also three AVETMISS specific fields 'Delivery mode', 'Funding source' and 'DET booking ID'.
Delivery Mode - This refers to how the class is conducted. Most programs are classroom based, and this is the default value. You can also change this at the outcome level if necessary, e.g. if one student completes the program by distance.
Funding Source - This refers to how the class is funded. These are set selection of national codes. You can also change the funding source at the outcome level, e.g. for AMEP funded students. For more information, visit the NCVER site
DET Booking ID - This field is specific to the NSW APL report. Visit Training Market NSW for more information on reporting and lodging your data
Information about the qualification, accredited course, skillset, modules and units of competency delivered in your class are set at the course level.
The following fields in the class relate to your delivery hours and AVETMISS reporting. This section has been deliberately made complex to assist our clients who are obliged to report AVETMISS for both VET delivery and non-VET delivery.
Qualification Hours - These are the nominal hours set by NCVER for the qualification. Often, this field is left blank, which is acceptable for AVETMISS. You can also add the nominal hours to the qualification yourself in the Qualification table.
Nominal Hours - The nominal hours field in the class is the total of the nominal hours of the units of competency assigned to the course. While the nominal hours for each unit are usually set by NCVER, you can override them or add them where they are missing in Module/Unit of Competency record. You can edit these values when you attach units to courses by double clicking on the unit record.
Classroom Hours - The total hours you have defined as scheduled activity by setting sessions or by defining the minutes per sessions and number of sessions on the General tab. This is not reported as part of AVETMISS for real VET outcomes - it is for your information only.
Reportable Hours - These are the hours that will be reported against each enrolment in the NAT00120 file. They default to the nominal hours of the units attached to the course. If there are no nominal hours set in the unit, i.e. in a non-VET course, the nominal and reportable hours will default to the classroom hours. You can override the reportable hours field to the classroom hours or any other number that you wish to export in it's place for non-VET courses only. For VET courses, you can also override the reportable hours in each outcome, if they differ from the unit nominal hours. NOTE: If you have created a class which has units of competencies assigned and not set nominal hours for these units, your contact hours and reported hours for these outcomes will always be zero. Reportable hours based on delivery hours only populate non-VET outcomes.
Student Contact Hours - This totals the reportable hours in the outcomes attached to the class. This can also be simplified to number of students x total class nominal hours for most cases, but in VET classes, some students may have different units assigned or different reportable hours for their units. SCHs are often used by funding bodies to measure delivery. If you have not set nominal hours in the units of competency, your student contact hours will calculate to zero. If your classes' course does not have units of competency assigned to it e.g. it is a non-VET course, the student contact hours will by default equal the classroom hours x number of students, unless you override the reportable hours field in the class.
The report Class funding will provide you with summary information, per qualification, per funding code of how many student contact hours you have delivered over the classes selected for the report. This can be used to check at various points during the year, the number of hours you have delivered that compare to your funding targets.
How to set up qualifications that are delivered by internal clusters where units of competency overlap
Clusters, in this case, refers to an internal grouping of units of competency that a college delivers to break up a qualification into teaching-focused groups of units. Sometimes one unit from a qualification may be delivered across multiple clusters, and a student must successfully complete the assessments in each cluster to achieve competency in the unit. For example the Qualification Certificate IV in Training and Assessment has 12 units in total, but the four Environment units are assessed in each cluster. The course is delivered in three clusters and each cluster has a fee that applies to it.
Create a new course and attach all the units that you deliver as part of the qualification. This is the formal enrolment where you will record the student's completion of outcomes once assessment has been sufficiently completed across your various clusters.
This is the course that you will advertise on your website, so make sure you include the full course description and information about how you deliver the program.
Next, create a class for this course, entering the dates, student fees and venue information. Details on how to create a class is available here. Web enable this class so students can enrol.
You may choose to set up this class as an 'application fee enrolment' and advise the students of the full fee within this class description. Do this by setting the class fee as the amount you wish them to pay to apply, and ensure your information explains what the approval process involves. You will need to contact students who apply and inform them of their success or otherwise, and organise payment of the full course fees.
The cluster courses that you create are for your scheduling and management purposes only. They will not be advertised online, as you will enrol students in these classes as appropriate.
The clusters that you create are not VET courses - do not attach the qualification or units of competency to these records. You can put details of the units and content covered in the description if you wish.
Set up each course and class with the assigned rooms, tutors and sessions
As onCourse will invoice students class fees, you can allow students to make full payments or part payments at the time of enrolment.
For example, you could set the full fee on the first class and track students as they make payments towards this total amount. Alternatively, you could set up multiple classes with fees attached, so students are only invoiced for a portion of the course fee each time they are enrolled in a new cluster.
In the example below, the full qualification has an application fee of $100, paid online. Once the student's enrolment has been accepted, they are invoiced $900 for the first cluster, and $500 for each of the subsequent clusters, until a total of $2000 has been paid.
All RTOs registered with ASQA must provide an annual summary report to ASQA of their performance against the learner engagement and employer satisfaction quality indicators. You are required to send a survey to every student who undertakes VET training with your college (the Learner Questionnaire), and to every employer with whom you conduct traineeships (the Employer Questionnaire). Read more on ASQA's requirements here Remember that students and employers don't have to complete these surveys, but you do need to send them out.
You will need to collate the responses and complete ASQA's Quality Indicator annual summary report. The template is available here.
SurveyMonkey is an online survey tool which can help you remove any paper from the survey process. SurveyMonkey has some pre-existing templates for the Questionnaires so you can get started very quickly. Set up a new account and then add them:
There is no cost for copying these templates, and SurveyMonkey has some cheap or free plans, depending on your usage needs.
You might also want to look at FormStack, SurveyGizmo, Google Forms and wufoo forms as some other survey tools. While you might need to create the survey yourself, each of these tools has some interesting strengths.
There are two ways to send students a link to your survey automatically.
In this option, onCourse sends SurveyMonkey or SurveyGizmo details of each student completing a VET course. The survey tool then sends out an invite to the student, with a link to the questionnaire.
The advantage of this approach is they you can log into your survey tool to see a list of all the students who have not yet responded. There are features there which allow you to send reminders. You'll need a paid account with the survey tool and this option takes a bit more work to set up.
Information on how to link your onCourse to your Survey Provider Account can be found here
Alternatively you can just email the student a link to the questionnaire. This will work with any third party tool, but you will not easily be able to generate a list of students who have not completed the questionnaire. Mostly this doesn't matter, because you only have to invite the student to complete, not ensure they respond.
Instructions for getting the SurveyMonkey link.
Instructions for getting the SurveyGizmo link.
These links are then added to an email template that can be sent out to all completed students. The records of the emails will be stored in onCourse, while the Survey results will be stored on the third party tool.