Unique Student Identifier (USI)

Contents

The onCourse USI process
How onCourse automates the USI process
What you need to do enable the USI validation service in onCourse
Capturing the USI in onCourse
Creating a USI for a student
Manual entry of a USI
Editing a locked student record
Student self-service
Step 1: Personal Details
Step 2: AVETMISS questions
Step 3: USI
USI Exemption Process
Certificate printing and the USI
USI FAQ

This section is only important for RTO's. If you are not an RTO, you don't need to worry about the USI or this section of the documentation.

The onCourse USI process

Our primary goal is to make obtaining and verifying USIs the responsibility of the enrolling student to minimise the data entry and management effort required by your office staff.

If a student enters their USI online, or you enter it manually in onCourse the USI will automatically be verified against the USI Agency system. In order for this process to work you'll need to run through the USI Integration process, listed on our Integrations page here.

The verification system is not available to onCourse community edition users who don't have a support agreement with ish. You can still capture the USI within onCourse and report it for AVETMISS but you will not be able to take advantage of the online student self-service process or the automatic verification process. Community users can verify their student's USIs manually using the USI Agency RTO portal.

How onCourse automates the USI process

When a student enrols in a course which is identified as a VET course, their enrolment confirmation will include some additional text explaining what a USI is and why they need to tell you theirs. This email directs them to a special onCourse portal page (no log in required) requesting they supply their USI or go through the process to create one.

Most students will be going through the process of creating a new USI. Once they complete this part of the process, we will then take that new USI and verify it against their first name, last name and date of birth as supplied on their enrolment. If the USI doesn't validate (possibly because the student used a dummy date of birth on enrolment, or a shortened version of their first name) then they will be prompted to update the incorrect data in onCourse to match their USI, so we can pass the USI validation process.

Provided you have the 'send usi reminder' script enabled in the Automation > Scripts section, every Monday morning (this timing can be changed), all recently enrolled VET students who have not supplied you with their USI will be sent an automatic reminder email on how to complete this process and why it is important they do so. A student who doesn't complete this process or can not validate their USI will be flagged in onCourse for you to follow up.

What you need to do enable the USI validation service in onCourse

You can enable the USI validation by following the steps laid out in the USI section of our external integrations chapter of our documentation. There are a handful of steps that must be completed externally to the onCourse system before running the integration so ensure you follow each step closely before moving on to the next one.

Capturing the USI in onCourse

The USI does not need to be captured at the time of enrolment, but typically you'll want to have it entered and verified before the class is completed in order to not delay issuing of certificates.

Creating a USI for a student

Some students will not be able to navigate the USI portal to obtain their own USI, in which case you are able to do this on their behalf within the VET section of their contact record, just click the cogwheel next to the USI field then select 'Create a USI...'

When there is no USI supplied, you can click on the link to open a web portal and create a new USI.

Clicking on this link will open a web portal where you can complete the student details and identity document information. You will need to declare that you have obtained permission from the student to complete this process on their behalf.

We do not recommend you copy or store the student's identity documentation in their onCourse record as this is in breach of the USI legislation.

Manual entry of a USI

When you create a new student or update an existing one, you can type the USI directly into the field available on the VET tab in their contact record. This can also be done directly within the Quick Enrol process. The USI will be checked for validity (it is the correct length and matches a checksum) and then verified against the USI agency.

What you will see if the USI has not been entered correctly. This USI is invalid as it doesn't meet the character length and checksum. It can't be validated and the record can't be saved.

If you have completed the steps to set up the USI Integration successfully, then the USI validation system in onCourse will be enabled.

Once a complete USI is entered in the student record, the background validation process with the USI Registry System will run automatically. The validation process is checking that the student's first name, last name, date of birth and USI match the data held by the USI Registry System.

If it succeeds the USI will be marked as verified with a green pill next to the USI field and the student's first name, last name and date of birth will become locked.

This USI has passed verification and the record has been locked.

If the one of the fields do not match e.g. the student's first name in onCourse is a shortened version of their legal name, then the USI verification process will fail. Hovering over the information icon next to the USI field label will show the reason why the verification process failed. You can update the non-matching data in onCourse and the verification process will run again, automatically, when you change one of the first name, last name, date of birth or USI field's data.

This USI has failed verification. The data can be corrected and the verification attempted again.

Editing a locked student record

After successful USI validation, the data that was matched with the USI - the first name, last name, date of birth and USI of the student, becomes locked and will no longer display an edit icon next to the field.

On occasion, a student may inform you that they created their USI with the wrong name details and wish to update their records. To do this, they need to contact the USI Agency by logging into their own portal and completing the process to make the change. Once the USI Agency has the details of the change, you can go ahead and update their onCourse records to match.

In the VET section of the contact, click the cogwheel next to the USI field and click 'Update USI'. This will empty the student's USI field and unlock their first name, last name and birth date fields. Once updated you'll need to re-enter the student's USI number for validation.

Click the cogwheel next to the USI field, then select Update USI to update an already verified contact's details

Student self-service

On enrolment through the office or the web, onCourse will send an email enrolment confirmation to the student. If the course is VET flagged, the confirmation template will include some text directing the student to obtain and supply you with their USI.

Another default script in onCourse can be enabled to send a reminder email to students every Monday at 9am until the class is complete or the USI is entered. You can modify these templates or alter the script which determines when and how often to send these emails.

Note that students are only sent this email if they are enrolled in a VET flagged class, to avoid bothering your students engaging in non-VET training, however by default VET flagged courses without qualifications or units will also trigger this email as they are usually reported via AVETMISS for funding arrangements. You may wish to alter the scripts to only send the email when the course has a qualification record attached.

An example of a confirmation email with USI information

An example of a USI reminder email.

Once the student gets the email requesting their USI, they will be able to click on a link which takes them directly to a page within the skillsOnCourse portal. They will not require a password and the link will be valid for 7 days from the email being sent. The URL is cryptographically signed so that they will not work after the expiry date and they will not be transferable between students.

You can change the default 7 days expiry to any number of your choosing by editing your enrolment confirmation and USI reminder email templates.

The skillsOnCourse portal page will explain the USI to the student and give them a convenient link to create or recover a USI if they don't have one or have forgotten it. This has been optimised so that it can be used on mobile and tablet devices. The student will be able to enter the USI and onCourse will handle the verification process automatically. The student will be asked to complete three steps

Step 1: Personal Details

The first step requests additional contact data not already captured on enrolment, that is mandatory for AVETMISS reporting or USI validation. No information they have previously supplied will be visible, only fields that are currently blank. This allows you, if desired, to collect minimal information during the online enrolment process and request the additional data be supplied post enrolment.

In the example below, the student is required to complete some mandatory fields such as their street address and country of birth, plus some options contact details such as home phone numbers. Previously supplied contact details like email address and mobile phone number are not displayed.

Step 1: This is the screen the students will arrive at. Fields will only be shown if data isn't already supplied.

Step 2: AVETMISS questions

The second step requests the student complete the AVETMISS questions. Responses to these questions are not mandatory but may be important for verification of student access to various types of government funding, for example, accessing lower student fees for Smart & Skilled funded programs.

For each VET enrolment the student has in progress, they will be asked to complete a 'reason for study' question. Some students may have this question once, for a single enrolment, where other students enrolled in multiple programs.

Step 2: The student completes the AVETMISS questions.

Step 3: USI

The third and last step requests the student supply their USI. If their date of birth was not supplied on enrolment, they will be asked to enter this also. If the student doesn't have, or know, their USI, they can click on the link to visit the USI Agency website to obtain or retrieve it.

On clicking next, the student's USI and contact details will be verified with the USI Agency.

Step 3: Provide your USI

Step 3 in progress: While the USI is being verified they will see this window.

If the USI agency reports back that the student's name is wrong (for example, they enrolled in onCourse with their maiden name but their USI is issued in their married name) then onCourse will give them the opportunity to fix this.

Step 3 failed: The student's name doesn't match the USI Registry data. They have the opportunity to correct the data in onCourse.

USI Exemption Process

There are two types of exemption currently available for students who don't want to, or can't, obtain a USI - international students who complete their training offshore (INTOFF), and students who have an individual exemption due to a personal genuine objection (INDIV). Check the USI website to ensure you have the most current information available about who is entitled to an exemptions and the process required for reporting.

To set a USI exemption in a student's contact record:

  1. Open the contact record and navigate to the VET tab

  2. Click the cogwheel option next to the USI field

  3. Select the exemption type that applies

  4. The record will update to inset the exemption code and marked the student's record as verified. This will allow you to print Certification.

Should a student's exemption status later change, the cogwheel can also be used to remove the special USI status, so an actual USI value can be entered and verified.

Certificate printing and the USI

The USI legislation requires that RTOs only issue formal certification to students who have supplied a USI which has passed verification.

From 1/1/2015 all certificate record print attempts will check the student USI status. A warning will show for any certificate print or reprint where the student doesn't have a USI. A certificate created after 1/1/2015 will not print without a verified USI.

A range of warnings and errors will appear based on your onCourse access rights. By default, all non admin users do not have permission to print certificates for students without verified USIs.

This certificate can't be printed as the user does not have permission to print without a USI.

All admin users will see the warnings if a student doesn't have a USI or verified USI, however they will be able to proceed to print for all certificates if they choose.

This is a warning only. You can still proceed by selecting print.

All access roles have two optional levels of access - print certificate without verified USI (this means the student has supplied a USI that meets the checksum requirements, but for whatever reason it hasn't passed verification with the USI Registry System) and a higher level of permission, print certificate without USI.

We do not recommend that you allow staff permission to print certificates without verified USIs.

This access role does not have permission to print certificates without a verified USI.

USI FAQ

1.

How do I make the USI validation process run in onCourse?

When onCourse detects you have entered a USI in the USI field on the Student VET tab, it will check that you have an RTO ID entered in your general preferences, and a First Name, Last Name and Date of Birth entered in the student record. If all these fields are complete, the USI Validation process will run automatically in the background.

If it fails, and you need to change some of the data to make it try again, make the change, click out of the field (use tab on your keyboard, or click into any other field) and the process will run again. If you don't need to change any data, just click in the USI field and click out and it will try again. You can do this as many times as you like - the validation check is quite fast, less than 3 seconds in most instances, and there is no limit to the number of times you can try to validate a USI.

2.

How can I test that my onCourse USI portal access is working as required?

Go and create yourself a USI. Then you can use your own details to create a new student contact and test the USI verification. Try without a date of birth or misspelled name to see the error responses you'll get in onCourse. You can discard the contact instead of saving it onCourse after sufficiently testing the verification process.

3.

What should I do when the student has created their USI in a name different to the name they enrolled with?

Commonly, students will enrol with the name they prefer to use e.g. Bob rather than Robert, but their USI will be issued in their legal name. When you try to verify the USI they supply against their name, an error will be returned telling you that the first name (or last name, or date of birth) doesn't match the USI you supplied. In that case, you can change the data in onCourse and the verification process will automatically run again.

If the student uses the USI portal to supply you with their USI, then they can correct their name spelling themselves. You might need to call the student to get their correct name spelling if you are collecting and verifying USIs via an office based process.

Of course, we have also had instances of students whose name is spelt incorrectly on their ID and therefore the name linked to their USI has the wrong spelling, or students who have enrolled using a married name, when the ID they used to create their USI was in their maiden name. You'd need to enter their name into onCourse as an exact match as their USI name to make it validate, but you probably don't want to do this as then their certificate will be issued in the wrong name too. For the time being, leave it as an invalid USI.

In these instances you need to get the student to log into their own USI Agency Portal and make the change there, and advise you once this has been done. Then you can try the validation process again, and it should pass with the right spelling.

4.

How can I find out which students USIs have failed to pass validation in onCourse?

In the contact window, you can search for students without a verified USI by using the following query:

student.usiStatus is NON_VERIFIED

You can then work through the list of returned to results to check the error messages, contact the students and make the appropriate changes. As you change the data, the verification process will run again.

5.

How can I find out which students need USIs but don't have one recorded in onCourse?

Using the class window, locate all your VET classes that are running and highlight them all. Use the find related function to find all 'Enrolled students' related to the highlighted classes.

In this new group of students, pop the following search query into search to find the students without verified USI's:

student.usiStatus is NON_VERIFIED

You can then manually follow them up with phone calls or find their enrolments to send them the USI reminder email.

To send the reminder email, select all the students and use the find related icon to find related enrolments. When the enrolment window opens, check the filter options 'current active' and 'completed active' to remove any cancelled or failed enrolments from the list. Then highlight all the enrolments and from the cog wheel choose the option 'send emails from template' and select the template called 'USI reminder email'.

6.

What happens when merging contacts with USIs?

You cannot merge two contacts with different verified USIs. If you attempt a merge, a notification will be displayed informing you that you can't do this.

If only one of the contacts has a USI, then they can be merged, but their First/Last Name and date of birth can't be changed during this process.

7.

How do I validate a student who has only one name?

You can put their 'one name' into both the first name and last name field in onCourse and it will pass validation. For example, a student with a single name like 'Madonna' will be entered as first name 'Madonna' and last name 'Madonna'. Their certificate and other documentation issued from onCourse will be in the single name 'Madonna', and the AVETMISS files will export the expected 'Madonna, Madonna'. Some students are setting up their USI with 'one name' because they misunderstand the question in the USI portal. They think it means no middle name. If you have a student with a name like 'Sally Smith' who has created their USI as one name, then you can record her as First Name = Sally Smith and Last Name = Sally Smith so her USI passes validation.